1.25 vs 1.50 differences

Discussion in 'PAX Download - PCI X-Fi Series' started by silu00, Jun 27, 2012.

  1. silu00

    silu00 New Member

    Joined:
    May 11, 2012
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    0
    I'm using the 1.25 driver set as I find it much better than the newer ones.

    But I've noticed that the newest 1.50 is based on 1.25 with some tweaks. What is the difference between the two? The bass is set to 140% in both sets according to descriptions, so I guess there are some differences in the mid and high frequencies.
     
  2. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,327
    Likes Received:
    254
    Trophy Points:
    108
    Ya please try the new 2.00 driver you may like plus you can over drive bass.inf back to 140% if wish. But need be done before installing the driver but all things are set at default :)
     
  3. silu00

    silu00 New Member

    Joined:
    May 11, 2012
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    0
    So I have to change bass.ini in the common folder from 100% to 140% before installation to have the values from the 1.25, right?

    Ok, let's say I've changed it to 140% and installed, so the bas is the same as in 1.25. But what are the other differences between 1.25 and 2.0. What about the mids and highs?

    I want to know what should I pay attention to while testing :)
     
  4. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,327
    Likes Received:
    254
    Trophy Points:
    108
    All mids and High are at 50% default sounds great trust me :) Try them ;) There mids default tweak inf you can lower or raise but you have save file each time then reinstalled.
     

Share This Page

visited