Îòâåò: 3550 released - x86 and x64 guys, thank your for your support! please don't forget to say thanks to Markus thrillhouse82 and Javier Gonzales, who helped me testing and fixing the memory issues E.
regsvr32 "C:\Program Files\kX Audio Driver\3550\kxasio.dll" Note: I think for 64 bit you should use regsvr32.exe from the \Windows\system32 directory and not the one in the \Windows\syswow64 directory (which I think is for 32 bit dll's). Thanks guys... Great job!
In control panel, when i check the properties of the WAVEHQ device, the levels tab is empty, there are no sliders, nothing. Where can i turn on debugging, since i cannot find any option? I would be glad to help.
AW: 3550 released - x86 and x64 nice work!! the driver works on windows 7 with 4gb and audigy 2 zs (3549 didnt work) but i have one problem... i have 5.1 speakers but no simultaneous output on rear speakers if i swap front/rear i hear something at the rear speakers but not on all speakers at the same time can anyone help me?
Îòâåò: Re: 3550 released - x86 and x64 get DebugView from Microsoft DebugView for Windows the driver should print some diagnostic messages errors are usually marked with '!' (note that other system and 3-rd party drivers may output some messages, too) E.
Sadly...that doesnt work I've tried both regsvr32.exe's from both folders and neither worked for me. Any other suggestions?
Did you see any messages from regsvr32? i.e. DllRegisterServer in C:\Program Files\kX Audio Driver\3550\kxasio.dll succeeded. or LoadLibrary("C:\Program...") failed - The specified module could not be found. or ... Did you try restarting kxmixer after registering the dll? BTW: Are you still not able to open the ASIO Control Panel (from the kX menu)? Are you using a 64 bit host application? Do not forget that 64 bit ASIO will not work with 32 bit applications.
Damn, i just installed Windows XP x64, bkz KX wanst working on Windows 7 x64 and KX 3549, now the default DSP works with WinXP 64 + KX 3550, but if i put ProFX src+ k2lt, and try to config StVol, it will eat all my ram and lock my PC. After double clicking STVol or Vol on my machine = KXMixer using 4+ GB Ram, and System Crash after 5 secs. specs: Windows XP x64 sp1 [clean install] SB0350 (Audigy 2 ZS) Core i7 920, 6GB ddr3, asus P6T Deluxe v2. Anyway thanks for the hard work, maybe i will reinstall Windows 7 64, if DSP is working OK in Windows 7 64, then its fine for me. |o/ *update: Im using Mixy 4x2 to reduce my volumes, and its working fine for me. So i will not install win7. xD
Works perfect on Win7 RC1 x86 with 4gb of ram on sb live! 5.1 16bit. Thanks Евгений! I won't get rid of this card ever. I love this project! U r the best!
This is the debug output when i try to open an mkv file with windiows media player classic homecinema, output renderer was Directsound:WaveHQ: HQ Intersection: client: 8ch/96000Hz/32Bps vs my: 8ch/96000Hz/32Bps kx_wdm: CDmaChannel::CDmaChannel: system addr: FFFFF880092F4000 physical: 7df85000 kx_wdm: HQ: format parsed: 8/32/96000 [pb] kx_wdm: [CMiniportWaveOutStreamHQ::Open] :: failed to allocated HQ buffer kx_wdm: !!! [CMiniportWaveOutStreamHQ::Init] : Failed to open audio HQ Intersection: client: 2ch/96000Hz/32Bps vs my: 2ch/96000Hz/32Bps HQ Intersection: client: 8ch/96000Hz/32Bps vs my: 8ch/96000Hz/32Bps kx_wdm: CDmaChannel::CDmaChannel: system addr: FFFFF88009303000 physical: 7df76000
this is the same but this time not using Directsound: [FFFFFA8006835980] WskProIRPGetAddrInfo is called. [bind=FFFFFA80060835C0] Binding reference count++ = 2 (status = 00000000, impersonation= 2). [FFFFFA8004B19A80] Request reference count++ = 3. [FFFFFA8004B19A80] RPC method type = 1: rpc-method succeeded, queue to rpc-pending-list. [FFFFFA8004B19A80] Request reference count-- = 2. [FFFFFA8004B19A80] WskKnrRpcComplete: rpc calls back for completion. [FFFFFA8004B19A80] WskKnrCompletePending: complete pending request (rpc=1). [FFFFFA8004B19A80] Request reference count-- = 1. [FFFFFA8004B19A80] Request reference count-- = 0. [FFFFFA8004B19A80] WskKnrCompleteRequest: rpc completion return status = 00000000 (reply=00000000). [FFFFFA8004B19A80] WskProAPIGetAddressInfo returned addrinfo: [addr=FFFFF8A008BD4B60]. [bind=FFFFFA80060835C0] Binding reference count-- = 1. [FFFFFA8004B19A80] WskKnrCompleteRequest: complete irp with IO status = 00000000. [addr=FFFFF8A008BD4B60] WskProAPIFreeAddressInfo freed addrinfo. HQ Intersection: client: 8ch/96000Hz/32Bps vs my: 8ch/96000Hz/32Bps kx_wdm: CDmaChannel::CDmaChannel: system addr: FFFFF8800AE4E000 physical: 7d640000 kx_wdm: HQ: format parsed: 8/32/96000 [pb] kx_wdm: [CMiniportWaveOutStreamHQ::Open] :: failed to allocated HQ buffer kx_wdm: !!! [CMiniportWaveOutStreamHQ::Init] : Failed to open audio HQ Intersection: client: 8ch/96000Hz/32Bps vs my: 8ch/96000Hz/32Bps kx_wdm: CDmaChannel::CDmaChannel: system addr: FFFFF8800CE9D000 physical: 7cba2000 kx_wdm: HQ: format parsed: 8/32/96000 [pb] kx_wdm: [CMiniportWaveOutStreamHQ::Open] :: failed to allocated HQ buffer kx_wdm: !!! [CMiniportWaveOutStreamHQ::Init] : Failed to open audio HQ Intersection: client: 8ch/96000Hz/32Bps vs my: 8ch/96000Hz/32Bps kx_wdm: CDmaChannel::CDmaChannel: system addr: FFFFF8800CEF0000 physical: 7cb88000 kx_wdm: HQ: format parsed: 8/32/96000 [pb] kx_wdm: [CMiniportWaveOutStreamHQ::Open] :: failed to allocated HQ buffer kx_wdm: !!! [CMiniportWaveOutStreamHQ::Init] : Failed to open audio Interestingly, if i select Directsound:MasterMixer, i get perfect audio, but the output is the same ?! HQ Intersection: client: 8ch/96000Hz/32Bps vs my: 8ch/96000Hz/32Bps kx_wdm: CDmaChannel::CDmaChannel: system addr: FFFFF8800ABE8000 physical: 7cb40000 kx_wdm: HQ: format parsed: 8/32/96000 [pb] kx_wdm: [CMiniportWaveOutStreamHQ::Open] :: failed to allocated HQ buffer kx_wdm: !!! [CMiniportWaveOutStreamHQ::Init] : Failed to open audio HQ Intersection: client: 2ch/96000Hz/32Bps vs my: 2ch/96000Hz/32Bps HQ Intersection: client: 8ch/96000Hz/32Bps vs my: 8ch/96000Hz/32Bps kx_wdm: CDmaChannel::CDmaChannel: system addr: FFFFF8800C0C2000 physical: 7caea000 kx_wdm: HQ: format parsed: 8/32/96000 [pb] kx_wdm: [CMiniportWaveOutStreamHQ::Open] :: failed to allocated HQ buffer kx_wdm: !!! [CMiniportWaveOutStreamHQ::Init] : Failed to open audio HQ Intersection: client: 8ch/96000Hz/32Bps vs my: 8ch/96000Hz/32Bps kx_wdm: CDmaChannel::CDmaChannel: system addr: FFFFF8800C1B4000 physical: 7cadb000 kx_wdm: HQ: format parsed: 8/32/96000 [pb] kx_wdm: [CMiniportWaveOutStreamHQ::Open] :: failed to allocated HQ buffer kx_wdm: !!! [CMiniportWaveOutStreamHQ::Init] : Failed to open audio
Thank you!!!! 64bit Win7 Ultimate + CT4670 + 3GB RAM is working. SPDIF-in works fine also! However ASIO is not working yet, even I tried the above methods. regsvr32 returns "succeeded" but the asio panel cannot be shown, and my apps can't list the kx asio. Thanks for the great work! I can't believe a 10 year old card (I originally bought the card for my PentiumII 266Mhz to replace AWE32) still works very fine on a modern and different architecture OS. Great work!
Îòâåò: 3550 released - x86 and x64 First of all, thank you Eugene for you work! kxDriver is really an awesome thing! My usage report. WinXP SP3 x86, Core 2 Duo E8500 CPU, 4G DRAM, Audigy2 soundcard (SB0244) Almost everything works as expected. There are two issues: - playback via WaveHQ doesn't work; I've got the following error message from WinAmp: Unsupported PCM format (44100 Hz, 16 bits per sample, 2 channels) Error code: 32 Windows error message: "The specified format is not supported or cannot be translated. Use the capabilities function to determine the supported formats". - (very minor) the help doesn't reflect the most recent changes in the driver (for example, there is no more Wave8/9 device, since now we have Wave0/1, Wave2/3, Wave4/5, Wave6/7). Windows 7 x86 (the same hardware) 3550 is the first version which works in my configuration. So I'm very glad to confirm there is no more >2Gb issue! The most features work normally (wave/direct sound/MIDI) playback, routing features, soundfont management and so on). But there are some issues: - FXBus #0/1 don't produce any audio data regardless of the speaker configuration, default playback device setting in the control panel, 'swap front/rear' option etc. In my setup 'Master Mixer' is selected as a default device, 'swap front/rear' is off, 'route headphones to Center/Subwoofer' is off, no changes in the default kxRouter setting. I've found that the audio stream for unknown reason (?) comes from FXBus#4/5. - WaveHQ playback doesn't work (see above); - it seems there is a problem with DirectSound/EAX hardware support. RightMark 3DSound v2.3 reports: Device: Master Mixer (kX 10k2 Audio (3550) - Generic) ({0.0.0.00000000}.{5fc37481-1e3c-4c7d-8de0-2dc301702473}) Features: Device has not enough hardware 2D buffers Device has not enough hardware 3D buffers EAX 1.0: N/A EAX 2.0: N/A EAX 3.0: N/A EAX 4.0: N/A EAX 5.0: N/A The games with DirectSound3D/EAX support (which works normally in WinXP with 3550) can't detect DirectSound3D & EAX features when running in Win7.
Thanks E. for this major update , finally i migrated to W7,kx works just great with 4gb ram on a x64 system.i`m lovin` every moment of the kx sound experience for 5 years now.Keep up the good work... Greetings, Ivan
Thanks, Eugene. This works on Windows 7 and 4 gb RAM. I would like to report, however, that if I disable "user subwoofer output", sometimes I get metallic distortions as I would get in Windows XP 64, and then I need to kill the mixer or always use "use subwoofer output".
it can be installed in my windows 2008. but!!!! microphone voice is OK! FXBus0/1.....and the others can not work~~~ it can not play any music.