ATI techs!! need info please !!

Discussion in 'Overclocking, Benching & Modding' started by satech2001, Sep 10, 2003.

  1. satech2001

    satech2001 New Member

    Joined:
    Mar 20, 2003
    Messages:
    93
    Likes Received:
    0
    Trophy Points:
    0
    If any ATI staff reads this please help.

    After killing my Club3D 9700pro(read this i found a friend that put it back together but one of the chips was damaged (pin was torn out of it)
    and i need some info as to what i can replace it with or sorta bypass it it if possible.

    Is there a chance i can get a partial blue print of that area of the pcb??
    The chip damaged was a little sucker with 8 pins and made by ST.
    It sat next to a bigger chip(i think 12 pin) and all under the aluminum plate ( i think the voltage controllers for ram)

    I dont suppose ATI would be kind enough to send one to me here in greece where i have no luck in finding it(i live in a small town away from any serious store that may have one).

    I would gladly pay for the shipping and im sure the cost of the chip is close to nothing but ill pay for that too if needed..
    If anyone can help please contact me @ satech62@otenet.gr
     
  2. BWX

    BWX get out and ride

    Joined:
    Nov 29, 2002
    Messages:
    19,684
    Likes Received:
    63
    Trophy Points:
    73
    Did you or your friend get the thermal plate off the chip? If so, how did you do it?
     
  3. satech2001

    satech2001 New Member

    Joined:
    Mar 20, 2003
    Messages:
    93
    Likes Received:
    0
    Trophy Points:
    0
    Well it took some Freon and alot of guts and a little flathead screwdriver
     

Share This Page

visited