DHzer0point 0.64 Release

Discussion in 'AMD Graphics Cards' started by PoopyTheJ, Apr 29, 2006.

  1. PoopyTheJ

    PoopyTheJ New Member

    Joined:
    Jan 15, 2003
    Messages:
    1,584
    Likes Received:
    1
    Trophy Points:
    0
    DHzer0point 0.64 is available now!

    Changes in this release

    Increased amount of screen resolutions
    Powerplay support returned, after exiting a 3d application your card will revert to a lower power state.
    All mobility cards supported through the x1k series cards, if you have trouble installing on your notebook let us know
    Increased pixel shader and vertex shader efficiency, with increased clipping optimizations
    General performance enhancements
    DHzer0point Color optimizations
    Support for and increased performance noted with Crossfire configurations
    We have removed the CP from this release due to the lack of configuration options. We are working on an alternative CP option other than CCC. The CP is available as a seperate download on Driverheavendownloads.net

    Issues
    One tester reported strange handling of horizontal spanning on LCD screens, if this occurs try reinstalling your monitor drivers. If this doesn't fix the problem please report it to us so we can contiue investigating.

    Future Enhancements
    Further Crossfire and Laptop optimizations
    Optimizations for X1k series Video cards
    Further resolutions up to 3840x1024 for Tri-screen configurations
    Further overall performance and IQ optimizations.

    Grab yours at www.driverheavendownloads.net and let us know your findings!
     
  2. LHC

    LHC Stingy and Stubborn

    Joined:
    Mar 13, 2005
    Messages:
    1,325
    Likes Received:
    8
    Trophy Points:
    0
    I would, but it hasn't updated yet

    I hope I can install these though, for some reason I keep getting INF video driver errors with my X1800GTO. Only ones that do work are the Omega 6.3's. Official give the same error. It tells me to install some standard VGA driver or something :confused:
     
  3. LHC

    LHC Stingy and Stubborn

    Joined:
    Mar 13, 2005
    Messages:
    1,325
    Likes Received:
    8
    Trophy Points:
    0
    Awesome, these install :)

    Can't wait to try them out, thanks! [​IMG]
     
  4. PoopyTheJ

    PoopyTheJ New Member

    Joined:
    Jan 15, 2003
    Messages:
    1,584
    Likes Received:
    1
    Trophy Points:
    0
    Glad to help ;)
     
  5. LHC

    LHC Stingy and Stubborn

    Joined:
    Mar 13, 2005
    Messages:
    1,325
    Likes Received:
    8
    Trophy Points:
    0
    F.E.A.R. runs better noticably for me. On the test run it hardly ever dips into the less than 25 FPS range on Maximum settings. I can't wait to see how it's like after my card decides to overclock and all :)

    Awesome release guys!
     
  6. lpzml

    lpzml New Member

    Joined:
    Mar 16, 2006
    Messages:
    57
    Likes Received:
    0
    Trophy Points:
    0
    thanks to your drivers i pwn face much faster
     
  7. TrevGlas

    TrevGlas New Member

    Joined:
    Nov 3, 2004
    Messages:
    67
    Likes Received:
    0
    Trophy Points:
    0
    Thanks for the release :)
     
  8. TV addict#2

    TV addict#2 New Member

    Joined:
    Jan 19, 2005
    Messages:
    43
    Likes Received:
    0
    Trophy Points:
    0
    gonna give these a test,thanks
     
  9. Widkidone

    Widkidone New Member

    Joined:
    Jun 11, 2003
    Messages:
    711
    Likes Received:
    1
    Trophy Points:
    0
    i tried to install these but i was having issues installing them like i did with the NGO 6.4s. I cannot figure out the problem.

    here were my steps:
    1. Uninstall Cat 6.4 drivers and CCC
    2. Reboot to safemode and run just the DriverCleaner ATI CCC and ATI without using the cab cleaner
    3. reboot to desktop have windows serach for the drivers just this one time.
    4. download and install drivers
    5. then reboot and shows the new hardware found app.

    **then tried again with using the cab cleaner and get the same problem
     
    Last edited: Apr 30, 2006
  10. Blackboost

    Blackboost -=[DHzer0point Author]=-

    Joined:
    Sep 28, 2004
    Messages:
    0
    Likes Received:
    0
    Trophy Points:
    0
    Go into Control Panel and remove everything related to ATi, NGO, zer0point and whatever driv er you have used so far. Then go into safe mode and choose to remove everything ATi related wuth Drivercleaner. After that boot into normal windows and install the drivers without letting Windows look for them.
     
  11. AlexM105

    AlexM105 New Member

    Joined:
    Sep 13, 2005
    Messages:
    209
    Likes Received:
    0
    Trophy Points:
    0
    This set is definitely better than ATi's regular 6.4. FEAR performance went up quite a bit. I'll try more stuff later, but so far great work!
     
  12. Widkidone

    Widkidone New Member

    Joined:
    Jun 11, 2003
    Messages:
    711
    Likes Received:
    1
    Trophy Points:
    0
    I did all that. then what happens is after i install and everything. It gives me this new hardware found. In the Device Manager i have this yellow "?" says unknown. So basically the same thing happen.
     
  13. AlexM105

    AlexM105 New Member

    Joined:
    Sep 13, 2005
    Messages:
    209
    Likes Received:
    0
    Trophy Points:
    0
    Adding on to what I said earlier.... Condemned (running on similar FEAR engine) also runs very well fully maxed, and BF2 rarely dropped under triple-digit frames (BF2 limits the frames at 100, so 98% of the time Fraps is stuck at 100. [​IMG] The original 6.4 drivers stayed over 100 about 85% of the time).
     
  14. lansi

    lansi New Member

    Joined:
    Apr 24, 2006
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    0
    Thanks! I tried it on my Acer X1400 and it works great. Playing around with the features now.
     
  15. PoopyTheJ

    PoopyTheJ New Member

    Joined:
    Jan 15, 2003
    Messages:
    1,584
    Likes Received:
    1
    Trophy Points:
    0
    Widkidone, can you post your Device ID so I can look through the installer recognition portions and see if there is an issue there?
     
  16. edgewise

    edgewise New Member

    Joined:
    Nov 24, 2005
    Messages:
    37
    Likes Received:
    0
    Trophy Points:
    0
    Hi, i have a doubt, if i decide to install the zer0point Control Panel, do i have to install zer0point CCC too? or i need to install Catalyst 6.4 and then zer0point CP?

    what are the steps to follow? i wanna install zer0point without the CCC :)

    peace out!
     
  17. Robbeh

    Robbeh New Member

    Joined:
    Nov 8, 2004
    Messages:
    33
    Likes Received:
    2
    Trophy Points:
    0
    Tempted to give these a try, do they include a softmod for my 9500 non pro?
     
  18. brownstonemr

    brownstonemr New Member

    Joined:
    Apr 8, 2004
    Messages:
    99
    Likes Received:
    0
    Trophy Points:
    0
    Thanks for the new set. However I can't seem to get these drivers to keep the new clocks I have set. I had no probs with the standard ATI 6.4's and overclocking. With this set I have used radlinker, ATT, and ATI Tool. Every time I enter into a game the clocks return straight to default.

    Any ideas?

    Thx!
     
  19. Emm0rtal

    Emm0rtal New Member

    Joined:
    Apr 30, 2006
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    I had same problem. Go to ATI.com and download the WDM drivers should fix it.
     
  20. Widkidone

    Widkidone New Member

    Joined:
    Jun 11, 2003
    Messages:
    711
    Likes Received:
    1
    Trophy Points:
    0
    PoopyTheJ sent you a PM.

    Emm0rtal i tried to install the DHzeroPoint 6.4 without the WDM drivers that came with the drivers and got the same problem. Now as for finding the Device ID, help her where do i go.
     

Share This Page

visited