During first Windows 10 boot on new platform i heard a strange psu click. Question.

Discussion in 'Windows & Other OS Discussion & Support' started by sew333, May 14, 2022.

  1. sew333

    sew333 Member

    Joined:
    Aug 24, 2016
    Messages:
    82
    Likes Received:
    5
    Trophy Points:
    8
    Hi pc:
    12900K with NZXT KRAKEN X73
    2x16GB DDR4 KINGSTON DDR4 3600MHZ in GEAR 1
    RTX 3090 Ti Gigabyte Gaming
    Aorus Z690 Elite DDR4 bios F5
    SSD 1 TB NVM PCIE
    Seasonic Px 1300W Platinum Prime

    I went from Aorus Z490 and 10850K to 12900K and Aorus Z690 Elite DDR4. Windows 10 is installed on SSD from 10850K build.When new pc booted i enabled in GEAR 1 XMP ( 3600 mhz ). Then i rebooted to UEFI again without issues.

    Then i reboot pc again and when windows 10 was loading ,pc shutts off ( heard psu click ) and turns back on again. And second time it booted to Windows 10 normally.

    Is my pc fine?

    Why pc shuts off ( OFF heard psu click) and turns back again on first time,when windows 10 was loading ? Pc shuts down and boot itself up. Not typical reboot.
    It happened before Windows 10 boot <%>Getting devices ready.

    But why it shutdown ( i heard a click from psu ) and then reboot itself?comes back automatically

    Windows 10 working now normally no issues , but just asking about that.
     
  2. sew333

    sew333 Member

    Joined:
    Aug 24, 2016
    Messages:
    82
    Likes Received:
    5
    Trophy Points:
    8
    Someone said this to me:"

    PSU shouldnt click during software install. If it reboots on its own after PSU shuts down and restarts there is a setting in the BIOS to restart on power failure. May have been a utility problem that was coincidental unless you are running a UPS.

    PSU shutting down isnt normal but several reboots while detecting hardware is normal."





    So what to think now?
     

Share This Page

visited