Hi everybody! Owners of E-MU 1616, test this version of the driver. creative+emu Analog inputs work. Supports 44.1-48 kHz. The mixctrl application (test version) has a mixer and switches of the levels of inputs and outputs pro / consumer. The hardware limiter also works. Tested on the Mavericks and High Sierra. To install, unpack the archive and run the install emu script. Reboot is not needed. After installation, you need to run edspctrl. To uninstall the installed files, run uninstall emu. For SB Live! and Audigy requires the kX AC97. Use install creative in attachment for them. For input select mic or line-in in Rec. Recording normally works only at 48kHz frequency. HQ HQ is a test version of the driver with support for the CA0151 chip, only for the Audigy 2 / ZS card line (except for the Audigy 2 value). Playback at 48, 96, 192 kHz without resampling, 2 channels. Recording is not supported. for e-mu only Version for e-mu cards only. Tested on e-mu 1616m. This is a version to test the ability of the card to operate at frequencies above 48 kHz. 44.1-192 kHz playback and recording. Analog inputs - 6 channels, ouputs - 6 channels. SPDIF input - 2 channels, ouput - 2 channels, up to 96 kHz. Input level adjustment does not work. Initialization at start at frequencies 88.2-192 is incorrect. The solution is to switch the frequency to another and back, then it works correctly. To remove the driver, you must manually delete it from the S / L / E folder and reboot. Do not use kextunload.