I get no sound from my center speaker ? [Audigy]

Discussion in 'General Discussion' started by x0ph3r, Jun 15, 2003.

  1. x0ph3r

    x0ph3r New Member

    Joined:
    Dec 22, 2002
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    I got an Audigy.. using 3533b drivers and no sound from the center speaker.

    ----Hardware / Software configuration---------------
    Drivrutinsnamn:kX Audio Driver (Debug)
    Datum: May 28 2003 00:28:30
    Version på drivrutin: 5.10.00.3533 - debug
    DB-namn:LiveBay1
    SB0090 10k2 [d400]
    PCI Information:
    Device: 41102 Subsys: 511102 ChipRev: 3
    Kortmodellen är '10k2'
    Card has MPU device
    Kortmodellen är '5.1'
    Card HAS AC97 codec
    Codec name: TriTech TR A5/CT1297 TAT
    3D Extension: No 3D Stereo Enhancement
    Codec is 1.0 compliant
    Capabilities[0] :
    DAC resolutions : -16-bit-
    ADC resolutions : -16-bit-
    Ext Capabilities [0]:
    Port: d400 Irq: 6
    Playback buffer: 20a0
    Record buffer: 4000
    Number of AC3 buffers: 4
    Tank memory: 256 kb
    GSIF buffer: 512 samples
    OS version: [2 5 1 Service Pack 1; 2 5 1 Service Pack 1; 156 148]
    ----------------------------------------------------

    Theres some info.. Thanks in advance.
     
  2. x0ph3r

    x0ph3r New Member

    Joined:
    Dec 22, 2002
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    *bump* :/
     
  3. Eugene Gavrilov

    Eugene Gavrilov kX Project Lead Programmer and Coordinator

    Joined:
    Dec 7, 2002
    Messages:
    3,146
    Likes Received:
    9
    Trophy Points:
    48
    probably, incorrect 'surrounder' setting

    /E
     
  4. x0ph3r

    x0ph3r New Member

    Joined:
    Dec 22, 2002
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    Ive got it at "5.1 Movie Mode" But it doesnt work at any other 5.1 mode either :)

    Any more ideas ?
     
  5. Mata Hari

    Mata Hari Active Member

    Joined:
    Feb 12, 2003
    Messages:
    214
    Likes Received:
    0
    Trophy Points:
    26
    Connected analog or digitally?
    if digital, and using a creative dtt3500 or similar, select the correct mode on the decoder... (dont have my own here handy, so I can't tell you what the correct setting is... I thought pcm multichannel and 5.1 mode or something)
     
  6. x0ph3r

    x0ph3r New Member

    Joined:
    Dec 22, 2002
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    Analog connection :/
     
  7. Mata Hari

    Mata Hari Active Member

    Joined:
    Feb 12, 2003
    Messages:
    214
    Likes Received:
    0
    Trophy Points:
    26
    Hmz, try the sound generator plugin in the dsp, and connect it directly to the analog center out of the epilog... check if you get sound then... if not, I guess you have checked the speaker/cable to the speaker itself?

    did it work on creatives driver?
     
  8. Max M.

    Max M. h/h member-shmember

    Joined:
    Dec 7, 2002
    Messages:
    2,690
    Likes Received:
    9
    Trophy Points:
    63
    his hardware, cables and jacks are ok - since he is able to hear center when "5.1 movie" preset is selected...
    (maybe he just waits for center when listening to stereo files? ;)
     
  9. x0ph3r

    x0ph3r New Member

    Joined:
    Dec 22, 2002
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    "...when listening to stereo files" - nah :p I dont get the center when I press "Test" in kX-mixer, only front right/left and rear right/left.

    And my cables are right :p

    Edit: Oh and yes, It worked with the creative drivers
     
  10. Eugene Gavrilov

    Eugene Gavrilov kX Project Lead Programmer and Coordinator

    Joined:
    Dec 7, 2002
    Messages:
    3,146
    Likes Received:
    9
    Trophy Points:
    48
    check/uncheck 'swap front & rear' and 'route headphones to c/sw' settings
    also 'reset settings'
    and, as suggested, connect a sound generator (or FXBus 0,1) to epilog's analog center/lfe
    [and start any wave playback]

    /E
     
  11. x0ph3r

    x0ph3r New Member

    Joined:
    Dec 22, 2002
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    Hmm I think I did what you said but no, no sound now either.. :/
     
  12. Mata Hari

    Mata Hari Active Member

    Joined:
    Feb 12, 2003
    Messages:
    214
    Likes Received:
    0
    Trophy Points:
    26
    --deleted, never mind, didnt read correctly-- :)
     
  13. x0ph3r

    x0ph3r New Member

    Joined:
    Dec 22, 2002
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    *bump* :uhoh:
     
  14. Eugene Gavrilov

    Eugene Gavrilov kX Project Lead Programmer and Coordinator

    Joined:
    Dec 7, 2002
    Messages:
    3,146
    Likes Received:
    9
    Trophy Points:
    48
    btw, does 'LFE' channel work?

    pls check the following, too:
    turn on 'router headphones to center/lfe' and check if you can hear your 'front left/front right' via 'center/lfe' jack

    /E
     
  15. x0ph3r

    x0ph3r New Member

    Joined:
    Dec 22, 2002
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    Nope, no sound.
     
  16. Eugene Gavrilov

    Eugene Gavrilov kX Project Lead Programmer and Coordinator

    Joined:
    Dec 7, 2002
    Messages:
    3,146
    Likes Received:
    9
    Trophy Points:
    48
    try to re-install Creative drivers and re-check center/lfe
    (perhaps, you got your audio output damaged...)
    if it works ... hm... I have the same audigy board as you have -- and it works here...
    and I have the same ac97 codec -- so, I doubt this is a driver problem

    /Eugene
     
  17. x0ph3r

    x0ph3r New Member

    Joined:
    Dec 22, 2002
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    Ok, Ill try that, as soon as I get my new hdd, my old one broke :/

    Thanks for the help anyway.
     
  18. x0ph3r

    x0ph3r New Member

    Joined:
    Dec 22, 2002
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    Hmm, could it be DX9 ?

    I just reinstalled win xp and it worked fine, then I installed dx9 and now I cant here my center/subw. again :/
     
  19. Eugene Gavrilov

    Eugene Gavrilov kX Project Lead Programmer and Coordinator

    Joined:
    Dec 7, 2002
    Messages:
    3,146
    Likes Received:
    9
    Trophy Points:
    48
    re-set 'hardware acceleration' and 'speaker configuration' in the control panel
    (as well as sound quality)

    /E
     
  20. x0ph3r

    x0ph3r New Member

    Joined:
    Dec 22, 2002
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    Hmm, Now I installed win 2003 dx9a an everything . And it works !

    Now I won't touch anything for a while :)

    Thanks for the effort anyway !
     

Share This Page

visited