Kolink Big Chungus UNIT Edition

Discussion in 'News Discussion' started by MIG-31, Oct 14, 2020.

  1. MIG-31

    MIG-31 Old time Member.. Staff Member

    Joined:
    Dec 29, 2002
    Messages:
    75,174
    Likes Received:
    2,348
    Trophy Points:
    153
    Stunning design, ready for high-performance hardware! The spectacular Big Chungus UNIT Edition showcase improves on a variety of aspects over the original case, which itself set a new standard in form and function. Big Chungus UNIT Edition features plenty of tempered glass and also room for EATX motherboards.

    [​IMG]

    The Kolink Bug Chungus UNIT Edition Case At a Glance:

    An extravagant showcase for motherboards up to E-ATX
    Both side parts, front and lid made of tinted tempered glass
    Base made of high-quality black anodized aluminum
    Five pre-installed 120mm PWM fans with digitally addressable RGB-LEDs
    Two pre-installed ARGB strips
    ARGB-LED PWM controller with infrared remote control
    Alternative RGB control via the motherboard using 3-pin 5VDG connector
    Graphics cards up to 335 millimeters, CPU cooler up to 175 mm
    Supports 2 x 2.5″/3.5″ + 2 x 2.5″ drives
    I/O Panel with 1x USB 3.1 Type C, 1x USB 3.1, 1x USB 2.0, Audio In/Out

    The Perfect Way To Show off Hardware
    Thanks to the tinted tempered glass panels on both sides, as well as on the lid and on the front, Big Chungus is the perfect place for some powerful gaming hardware. A motherboard up to E-ATX form factor will fit in this spacious frame. Graphics cards up to a length of 335 millimeters can be installed, with CPU coolers up to 175 millimeters high. Thanks to the large cut-outs in the frame, the case remains remarkably light despite its size. This also ensures an optimal air supply from the outside.

    The angular case sits slightly angled upwards on a distinctive base, which is also made of black anodized aluminum. The I/O panel offers excellent connectivity, with a modern USB 3.1 Type C port as well as a USB 3.1 and a USB 2.0 port. With this variety of connections, almost all USB peripherals can be used directly on the case, whether keyboard and mouse, external USB data carriers, or even smartphones, which can even be charged there.

    Ample Space For Air and Water Cooling
    Five 120 mm PWM fans with digitally addressable dual ring RGB-LEDs are already pre-installed. Four of them adorn the front and can be admired via the tinted tempered glass. A further 120 mm PWM fan, also with digitally addressable RGB-LEDs, is integrated into the single fan slot on the rear. Two additional 120 mm fans can be installed under the lid and three 120 mm fans can be installed in the bottom. Accordingly, the fans can also be replaced by radiators. 360 mm radiators can be mounted on the base and front, and there is room for a 240 radiator in the roof. The ATX power supply unit (available separately) is mounted beneath the three fan slots on the base and is hidden by the base. It can be up to 220 millimeters in length.

    One feature that stands out visually is the versatile PWM fan and ARGB controller, which is mounted behind the motherboard tray. The five pre-installed fans are connected to it. The two ARGB-LED strips are connected at the side. Additionally, there are 5 more slots available for other 6-Pin fans if needed. The ARGB-LED lighting is controlled via an included infrared remote control. The controller/hub can also be connected to a motherboard via a cable, and the ARGB LEDs can then be synchronized with other ARGB components. The fans are also PWM controlled via the cable connecting to the controller.

    Specification:

    Dimensions: 668 x 336 x 651 mm (H x W x D)
    Weight: approx. 16 kg
    Material: steel, aluminium, tempered glass (sides), plastic
    Colour: Black
    Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX
    Fans possible in total:
    4x 120 mm (front side)
    2x 120 mm (cover)
    1x 120 mm (backside)
    3x 120 mm (floor)
    Pre-installed:
    4x 120 mm (front, PWM, digitally addressable RGB-LEDs)
    1x 120 mm (back panel, PWM, digitally addressable RGB-LEDs)
    Fan/ARGB controller/Hub:
    Outputs:
    10x 6-pin (ARGB/PWM)
    2x 3-pin ARGB (5VDG)
    Inputs:
    1x 3-Pin ARGB (connection with the motherboard)
    1x PWM 1x SATA power (for power supply)
    Radiator mountings (reduces the number of HDD and/or fan mounting locations):
    1x max. 360 mm (front side)
    1x max. 240 mm (cover)
    1x max. 120 mm (backside)
    1x max. 360 mm (bottom)
    Power supply: 1x standard ATX (optional)
    Expansion slots: 7
    Drive Bays:
    2 x 2.5″/3.5″ + 2 x 2.5″
    I/O Panel:
    1x USB 3.1 Type C
    1x USB 3.1
    1x USB 2.0
    1x Audio In/Out
    Maximum graphics card length: 335 mm
    Maximum CPU cooler height: 175 mm
    Maximum length ATX power supply: 220 mm

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     

Share This Page

visited