OS X 1.11b0 (BETA) Bug Reports

Thanks Eugene Gavrilov!

But there is critical problem with kxAudio Driver 1.11b0 on Show Leopard and Lion:

1. Skype crashes after 3 seconds after start. Can't use at all.
2. There is no any microphone in Sounds settings window.

Please fix the issue with Skype and no microphone. When you will do it or we need to buy another sound card? Thanks!

 

I have a sb0350 and I have success in recognising the card in the system preferences as a kx sb0350 10k2 [d000] but i don`t have any sound at all! Here are my other specs: ga-g31m-es2l; Q8300; asus 9800gt; sb0350 and running 10.6.8. I have disabled my onboard audio and removed all old kext such as Voodoo...
This is what shows when i type edspctrl in terminal

Code:

==== E-mu E-DSP initialization
 ==== FPGA is not programmed, upload FPGA firmware...
 Warning: your E-DSP card is not recognized
 Error: FPGA could not be programmed [fffffff5]
 ==== E-DSP Parameters were reset to defaults
 ==== Dock is connected, but appears offline, upload dock firmware...
 Found AudioDock in OFFLINE state, upload FPGA firmware now...
 Warning: your Dock seems to be AudioDock, but it is not recognized
 Error: FPGA could not be programmed [fffffff5]
 FPGA Version: Hana: 11.11, Dock: 11.11, Board: 11
 ==== E-DSP Parameters were reset to defaults
 ==== Current E-DSP status
 Card: 'SB0350 10k2 [d000]'
 Options: b - Hamoa Sync  Dock_offline
 Hana ID: b
 Versions: 11.11, 11.11, 11
 Dock is Powered-On. [0xb]
 WClock: 3 [HANA ADAT-In]
 Def clock: -1
 HANA is Unknown!
 HANA IRQs: b
 SPDIF mode [b]:
     Out: Professional; Copy-protected
     In: Consumer; Copy-protected
 Optical Type: [b] -- Input: ADAT, Output: ADAT
 MIDI In: dock2 , 0202 [b]
 MIDI Out: b
 LEDs: b b b
 ADC pads: b - Dock_1 Dock_2 0202_1 
 DAC pads: b - Dock_1 Dock_2 Dock_4 
 Dock misc: [b] DAC mute: 1101 headphones: 0
 ADAT Unlocked
 SPDIF Locked : 67516
 BNC Locked : 67516
 SPDIF Locked : 67516
 reg 14-1f:[b] [b] [b] [b] [b] [b] [b] [b] [b] [b] [b] [b] 
 reg 30-3f:[b] [b] [b] [b] [b] [b] [b] [b] [b] [b] [b] [b] [b] [b] [b][/QUOTE]

 

lion 10.7.3
i installed kXAudioDriver-1.11b0.dmg on sounds i can see my soundcard emu 0404 but with no audio,also i can't open kX AC97.app and kX Manager.app.Any help?

 

Îòâåò: Re: OS X 1.11b0 (BETA) Bug Reports

Your card is NOT E-DSP, you don't need to run edspctrl.
Verify 'swap front and rear' option: it is off on macs by default and on on Windows.
(You need to use kxctrl for changing the option).

E.

 

My OS X is 10.7.4 ,install 1.11b0,only output, MIC and input port is not useful. Can you help ? thanks

 

Hello.
for more than a year that I try to install the kx 1.11b on my Hackintosh.
I have a 0404.
In daw I see the device but no sound I hear.
I have followed the various procedures on the terminal but nothing.
I promise that I will make a donation if I can get my 0404.
thanks

 

Hi i have the same problem as wind315 write .... I have the sb0280 audigy 2 on my OS X 10.7.3 only the outputs work , the inputs, kX Manager and AC97 NOT working.... please any help?

thanks