sblive analog/digital out question

Discussion in '3-D Audio' started by cjber, Apr 23, 2004.

  1. cjber

    cjber New Member

    Joined:
    Apr 23, 2004
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    0
    Hello

    I was trying to put a cheap 5.1 speakers set in my sblive 5.1 (sb0102 5.1 d400).

    I was able to redirect center/subwoofer (left: center / right: subwoofer) output via the analog/digital out (the orange one), by plugging a standard minijack (not the one specified in the manual).

    (The above was done tweaking the DSP and the mixer).

    So, my question is:
    ¿will the sound card have physical damage by plugging a standard minijack in this orange line out, which according to the manual was designed to be plugged by other minijack?

    And yes, I know how easy is for you to get a creative inspire speakerset (and avoid this problem/question); but these are hard to get where I live.

    Ps: sorry for the bad english

    Thanks for your time
     
  2. dj_stick

    dj_stick Apple Fanboy?

    Joined:
    Jun 3, 2003
    Messages:
    17,575
    Likes Received:
    204
    Trophy Points:
    88
    the orange port works fine with a standard 3 pole jack… the 4th connector is grounded when usign one you will do no damage, as the card was desgined for this
     
  3. cjber

    cjber New Member

    Joined:
    Apr 23, 2004
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    0
    thanks for the help
     

Share This Page

visited