Test Auzentech drivers thread before goes official thread.

Installed the Prelude 3.50 set, now I can't launch the Console Launcher nor the Audio Control Panel, it says there is no supported device?!

Edit: Prior to installing your 3.50's, I uninstalled my old Auzen drivers and used a driver sweeper in safe mode. My sound is working, and the device is being listed as "Auzen X-Fi Prelude 7.1", though the sound buffer length is obviously not big enough.

 

Re : Test Auzentech drivers thread before goes official thread.

Arklon--> I had the same problem, test this, it worked for me: : Fix - The audio device supported by this application is not detected (Still a common issue) | Auzentech Community
especially for the registry entries because some files are not the same but removes those that you find

Robert--> This is not specifically your driver that does this, it comes from the Creative drivers

 

Hey Rob',

first off all, it's an awesome work you're doin' with those drivers, especially the much better pitch adjustments and the improoved realtime encoders (which are finally working without sound disstortions). But I noticed a little flaw in the last two released versions of the Auzentech Home Theater HD drivers. The install folder of the DTS Connect pack contains the exact same files as the install folder Dolby Digital Live pack. This means that after the installation auf the divers, I only got Dolby Digital Live realtime encoding and don't have the DTS Connect realtime encoding with the higher bitrate than Dolby Digital Live and the awesome DTS NeoC upscaling. I don't know if only the PAX Auzentech Home Theater HD drivers are affected by this or if other PAX Auzentech Drivers (or even other Creative X-fi drivers) also got this problem.

But still awesome work. If you could fix this problem, I'd be even more looking forward for new releases.

Thank's in advance.

 

AW: Test Auzentech drivers thread before goes official thread.

No problems here so far with FORTE V4.25 but still an annoying thing which I also had with the previous version: from time to time the mode automatically switches back to the gaming mode on a Windows start. Normally I use the entertainment mode.

That happens at random and I also see no coherence here since I do not change any settings nor do I use the automatic mode switcher.

 

Re : Test Auzentech drivers thread before goes official thread.

no prob with 4.25 forte big thanks !!

 

Ozzy601,

Thanks for the heads up, i replaced the DTSCon Folder with one from 3.10 driver into latest and it installed and works fine.

 

Thanks again for your efforts. I'll testing the new drivers for HTHD.

 

Bob, really appreciate your work to make my Auzentech card work much better. I'm running the PAX X-Fi Home TheaterHD V3.75, and was wondering if the tweaks.ini can be applied for this card, and if so what is the procedure for installation? Thanks

 

I can't understand why creative won't hire Robert McClelland. I hope to see future updates for Bravura. Thank you for saving me on live, audigy1, audigy2, xfi.... and now bravura.

 

I have been testing the new 4.0 drivers for the Hometheater HD. The soundquality has become much more awesome.
But, there seems still to be the problem, that only the dolby digital live pack but not dts connect pack is included (because the dts connect installation folder still contains the same files of the dolby digital live folder).
I would try to replace the dts connect installation folder with that of an older version, just as Batosai said, but I don't know if I would be missing any tweaks on the dts connect pack (if you made some of course) of possible newer diver releases.
So I would be really grateful if you could fix this.

Thanks in advance and keep up that awesome work.

 

auzen HD theater 4.00 set already installed and tested and everything is ok, better and crisper bass sound, thx dude, u r awesome