Windows 10 x64 and TitaniumHD drivers do not work yet

Thanks for reply
I had tried to reinstall the driver and run UDAAIM64.exe, UDATEL64.exe, AppSetup.exe
But the DTS connector and X-Fi CMSS-3D still not work / _ \
Finally, DD Live still work in 5.1

 

ok, thanks i dont have much time during the week, but i will try may be on weekend

 

It looks like you don't have installed UDAAIM64.exe
If you don't install with the /S at the end is not installing.

 

I had installed all three exe with /S
When I run them...any pop up windows with show up?

 

No. But u must use quotes. Otherwise the command window will just open, give an error and close, if the path is to long (You won't even see the error).

To see if it did install u must find APOMgr64.dll located in C:\Windows\System32

 

I had found the file in SYSTEM32

 

Use these registry files.

http://www.filedropper.com/createch

If this doesn't work I cant help you anymore. You might have problems with drivers themselves.

 

Unlucky
still same problem....thanks for the help
I may try another version driver not 2015 V1.0

 

Hello Guys. I have been googling all night and finally found this. Hopefully someone can help me.

I have PCI Express X-Fi Titanium Fatal1ty Pro Series using Windows 10 build 9926. I'm not familiar with what PAX drivers are but I downloaded them and all the registry files in this thread. I can't get it to work at all.

So far there is no sound being produced at all.

Here are the steps I took.

1 download and install Titanium Driver Suite v1.40
2. download all registry files in this thread and install them.

No sound is coming out of my speakers.

Also, I'm not familiar with this process

"Search then in the Drivers for your creative card the following files UDAAIM64.exe and UDATEL64.exe.

then in start run add: " ...path to UDAAIM64.exe ...\UDAAIM64.exe " /S and click enter
and again in start run add: " ...path to UDATEL64.exe ...\UDATEL64.exe " /S and click enter"

What does this mean? is this command prompt? what is Start Run Add? do I just type these words into the run window?

Anyway please help. Thank you.

 

Thanks ChrissT! I registered to thank you...

Thank you! My console is now working! I just need to figure out how to make my 5.1 setup work. I can select it in the console and native speaker setup but only my two front speakers work. Everything was fine when I was on 9879, moved up a few builds and I'm now on 10041 but it's still broken. Any thoughts?

 

It seems u never used Run command... Right click in lower left corner and u have run there...
And u have to install drivers without driver signature activated at windows startup.

 

My thoughts are to run applications as admin . It seems that in MS is still playing with user files access rights in win 10.

 

i cant get my 5.1 to work on the 10074 build even using the reg i can change it even on control panel but i only get 2.0 output even with 5.1 chosen on settings any help? i tryed everything with "admin rights"

 

+1

You will retain the settings after restarting ?, I think the problem comes from there. Not me.

 

even with the 5.1 chosen on settings the sound outputs only on 2 front speakers.. even the sound test says back right and back left on the 2 front speakers..

 

it looks bad windows 10 should be released in july and titanium hd software should be available in october http://support.creative.com/kb/ShowArticle.aspx?sid=126331 btw still no change with those tweaks, even on 101xx build of windows may be after ages it´s time for some upgrade

 

in 10074 build work fine , but on build 10122 not working console and all effects (eq, mode game, music , etc)

any idea/solution?



:c

 

How has Windows 10 Technical Preview been so far in terms of Creative Titanium HD (X-Fi) drivers? I tried the very first and the second official Technical Previews but SPDIF Out was not working so I didn't bother with Windows 10 Technical Preview ever since.

Microsoft has released a bunch of new builds since then, has the current drivers worked with any of them? Or would it seem like we are all out of luck until October (earliest) with Creative releasing new drivers and software for Windows 10? The GA / RTM is supposed to be signed any day now and will be pushed towards end-users at the end of the month.